TF 80 can be applied with most standard painting equipment, such as squeegees, rollers, and brushes. Be sure to use solvent resistant products when working with TF 80. Ensure adequate ventilation when applying the product.

If overcoating Terrafuse products, make sure to apply within the recoat window (16 hrs). If outside the recoat window or completing repairs, you must mechanically abrade the surface using a, diamond grind or abrasive blasting. If extensive mechanical preparation is not done, there is a risk of poor adhesion and delamination of the coating.

Application Temperature
-10°C (14°F) min. / 35°C (95°F) max. (For temperatures outside this range, contact Terrafuse Inc.)
Product will take longer to cure at low temperatures. High humidity will decrease working time.

Color Tint Additions
Only add tint supplied by Terrafuse Inc., to ensure compatibility and proper reactivity of the final film. Shake tint before use. When using more than 1 container of tint, it is recommended to mix all containers together prior to use in order to achieve a consistent color. Add 200-250mL of tint to every mixed gallon of product. Do not exceed 300mL of tint per mixed gallon. Never pre-tint any of the components. This will alter the critical 1:1 mix ratios of the Part A and Part B. Always be sure to measure the clear A and B components 1:1 by volume first, then add the tint.

Non-Slip Additive
Only add non-slip additives provided by Terrafuse Inc. to ensure compatibility and proper reactivity of the final film. Add 8 ounces (1 cup) of non-slip additive to 1 gallon of mixed material. More or less additive can be used to achieve desired affect.