Skip to product information
TFEPOXY_TAN
  • TFEPOXY_TAN
TF Tan Epoxy Polyaspartic Kit

TF Tan Epoxy Polyaspartic Kit

TF Epoxy is an interior, two-component epoxy coating. It has excellent adhesion properties to concrete and has superior mechanical properties. This coating is formulated with no solvents, designed as a clear or tinted base coat for decorative flooring.

TF Epoxy is designed with chemical and abrasion resistance, hardness, and low flexibility. TF epoxy is not UV stable, and only designed for interior environments. Combined with the TF Tints, TF Epoxy can be applied in a variety of colors. Please refer to the data sheet for proper surface preparation and product use.

TF Epoxy can be applied with most standard painting equipment, such as squeegees, rollers, and brushes. It is recommended to ensure adequate ventilation when applying the product. If overcoating Terrafuse products, make sure to apply within the recoat window (24 hrs). If outside the recoat window or completing repairs, you must mechanically abrade the surface using a, diamond grind or abrasive blasting. If extensive mechanical preparation is not done, there is a risk of poor adhesion and delamination of the coating.

TF Epoxy comes clear, pre-tinted
as Grey or Tan.

TF Epoxy is a versatile coating, designed for use on properly prepared concrete substrates. While not limited to specific applications, the following list gives a general guideline for where TF Epoxy is typically installed.

• As a base coat for decorative broadcast media.
• A base coat for garage floors, wash bays, warehouse floors
• Prime coat for polyaspartic or polyurethane top coast

No videos available at this moment.
Data Sheet

You may also need

Complete your purchase with these recommended products

No recommendations available at this time.