Skip to product information
Six white plastic buckets of TerraFusae TF80 herbicide and fungicide mixtures arranged on a plain white background, including two stacked buckets on the left and four single buckets on the right.
  • Six white plastic buckets of TerraFusae TF80 herbicide and fungicide mixtures arranged on a plain white background, including two stacked buckets on the left and four single buckets on the right.
TF 80 Polyaspartic Kit

TF 80 Polyaspartic Kit

Our most popular coating option, TF 80 Polyaspartic is a fast curing, two-component polyaspartic coating. It has excellent adhesion properties to many substrates, and has superior mechanical properties. This coating is formulated at 80% solids, zero VOC’s and designed as a base coat for decorative chip flooring, or as a standalone top-coat.

TF 80 is designed for UV stability, abrasion resistance, high hardness, and high flexibility. TF 80 is available in super slow, slow and fast curing formulations. Combined with the TF Tints, TF 80 Polyaspartic can be applied in a variety of colours. Available in 2, 5, and 10 gallon kits. Please refer to the data sheet for proper surface preparation and product use.

TF 80 can be applied with most standard painting equipment, such as squeegees, rollers, and brushes. Be sure to use solvent resistant products when working with TF 80. Ensure adequate ventilation when applying the product.

If overcoating Terrafuse products, make sure to apply within the Recoat window of 24 hours. Installing beyond 24 hours will require mechanical abrasion to ensure a proper bond. If extensive mechanical preparation is not done, there is a risk of poor adhesion and delamination of the coating.

Application Temperature
-10°C (14°F) min. / 35°C (95°F) max. (For temperatures outside this range, contact Terrafuse Inc.)
Product will take longer to cure at low temperatures. High humidity will decrease working time.

Color Tint Additions
Only add tint supplied by Terrafuse Inc., to ensure compatibility and proper reactivity of the final film. Shake tint before use. When using more than 1 container of tint, it is recommended to mix all containers together prior to use in order to achieve a consistent color. Add 200-250mL of tint to every mixed gallon of product. Do not exceed 400mL of tint per mixed gallon. Never pre-tint any of the components. This will alter the critical 1:1 mix ratios of the Part A and Part B. Always be sure to measure the clear A and B components 1:1 by volume first, then add the tint.

Non-Slip Additive
Only add non-slip additives provided by Terrafuse Inc. to ensure compatibility. Add 8 ounces (1 cup) of non-slip additive to 1 gallon of mixed material. More or less additive can be used to achieve desired affect.

Data Sheet USA Data Sheet CAN SDS Part A SDS Part B

YOU MAY ALSO NEED

SHOP THE FULL COLLECTION