Our most popular coating option, TF 80 Polyaspartic is a fast curing, two-component polyaspartic coating. It has excellent adhesion properties to many substrates, and has superior mechanical properties. This coating is formulated at 80% solids, designed as a base coat for decorative chip flooring, or as a standalone top-coat.
TF 80 is designed for UV stability, high chemical and abrasion resistance, high hardness, and high flexibility. TF 80 is available in both slow and fast curing formulations. Combined with the TF Tints, TF 80 Polyaspartic can be applied in a variety of colours. Available in 2, 5, and 10 gallon kits. Please refer to the data sheet for proper surface preparation and product use.
Special pricing available for contractors, retailers and distributors. Please use the request pricing button!
Our most popular coating option, TF 80 Polyaspartic is a fast curing, two-component polyaspartic coating. It has excellent adhesion properties to many substrates, and has superior mechanical properties. This coating is formulated at 80% solids, designed as a base coat for decorative chip flooring, or as a standalone top-coat.
TF 80 is designed for UV stability, high chemical and abrasion resistance, high hardness, and high flexibility. TF 80 is available in both slow and fast curing formulations. Combined with the TF Tints, TF 80 Polyaspartic can be applied in a variety of colours. Available in 2, 5, and 10 gallon kits. Please refer to the data sheet for proper surface preparation and product use.
TF 80 can be applied with most standard painting equipment, such as squeegees, rollers, and brushes. Be sure to use solvent resistant products when working with TF 80. Ensure adequate ventilation when applying the product.
If overcoating Terrafuse products, make sure to apply within the recoat window (16 hrs). If outside the recoat window or completing repairs, you must mechanically abrade the surface using a, diamond grind or abrasive blasting. If extensive mechanical preparation is not done, there is a risk of poor adhesion and delamination of the coating.
-10°C (14°F) min. / 35°C (95°F) max. (For temperatures outside this range, contact Terrafuse Inc.)
Product will take longer to cure at low temperatures. High humidity will decrease working time.
Only add tint supplied by Terrafuse Inc., to ensure compatibility and proper reactivity of the final film. Shake tint before use. When using more than 1 container of tint, it is recommended to mix all containers together prior to use in order to achieve a consistent color. Add 200-250mL of tint to every mixed gallon of product. Do not exceed 300mL of tint per mixed gallon. Never pre-tint any of the components. This will alter the critical 1:1 mix ratios of the Part A and Part B. Always be sure to measure the clear A and B components 1:1 by volume first, then add the tint.
Only add non-slip additives provided by Terrafuse Inc. to ensure compatibility and proper reactivity of the final film. Add 8 ounces (1 cup) of non-slip additive to 1 gallon of mixed material. More or less additive can be used to achieve desired affect.
Incredibly strong. Wide range of mixing consistency - thick or thin. Sets fast so you mix small batches but can get more repairs done in a day. Feathers out very well. What else can I say? Buy it.
Had a few issues around the house and was looking for a real solution that wasn’t a temporary solution. Product went down easy, and I can already tell already it’s far Superior to products you buy it at most home improvement stores.
All Terrafuse Polyaspartic products including TF 80 and TF 90 can be made to have increased slip resistance by using any of the TF Grip additives. Our non-reactive, specially graded, and easily dispersible non-slip additive comes in two grades - coarse and super coarse.
TF Decorative Flakes can be used with TF 80 and TF 90 to create beautifully decorative floors. Available in a variety of colour designs, TF Decorative flakes can be used to enhance the aesthetic qualities of our TF Polyaspartic flooring systems.
All Terrafuse Polyaspartic products including TF 80 and TF 90 can be tinted with TF Polyaspartic Tints. The tints are provided in 1 Quart (950mL) quantities.
